Difference between revisions of "Teleducation"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
# <del>Original VPoint software</del> {{red|the original comes with the mxm CD and the update is downloadable. Anyways it is not working without the MXM}} | # <del>Original VPoint software</del> {{red|the original comes with the mxm CD and the update is downloadable. Anyways it is not working without the MXM}} | ||
# <del>Original QuickTime Pro</del> | # <del>Original QuickTime Pro</del> | ||
| − | # Check DVD writer for 120GB disk {{red|'''NO.''' The HDD delivered is 80GB built in the system and not 120 as it was asked}} | + | # <del>Check DVD writer for 120GB disk {{red|'''NO.''' The HDD delivered is 80GB built in the system and not 120 as it was asked}}</del> |
| − | # Problems with the touch panel/Netlinx programming {{red|Monday August 1st we'll start working on it with medion7}} | + | # <del>Problems with the touch panel/Netlinx programming {{red|Monday August 1st we'll start working on it with medion7}}</del> |
## <del>Manual dialer does not work from the panel</del> {{red|Note: }}{{green|HD5000 must be either on the DLP or the fornt TV for the manual dialer to work}} | ## <del>Manual dialer does not work from the panel</del> {{red|Note: }}{{green|HD5000 must be either on the DLP or the fornt TV for the manual dialer to work}} | ||
## <del>The front Plasma TV does not switch to s-video mode using the touch panel. Once you use the remote control then it can also be done from the panel.</del> | ## <del>The front Plasma TV does not switch to s-video mode using the touch panel. Once you use the remote control then it can also be done from the panel.</del> | ||
Revision as of 07:55, 24 August 2005
This is the Tele-education room wiki page
Pending Issues with Tender
Soundblaster Live 5.1 cardOriginal VPoint softwarethe original comes with the mxm CD and the update is downloadable. Anyways it is not working without the MXMOriginal QuickTime ProCheck DVD writer for 120GB disk NO. The HDD delivered is 80GB built in the system and not 120 as it was askedProblems with the touch panel/Netlinx programming Monday August 1st we'll start working on it with medion7Manual dialer does not work from the panelNote: HD5000 must be either on the DLP or the fornt TV for the manual dialer to workThe front Plasma TV does not switch to s-video mode using the touch panel. Once you use the remote control then it can also be done from the panel.Rear camera movement does not work properly from the touch panel. Camera moves smoothly right and down. Up arrow takes the camera all the way up. The camera does not respond to the left arrow.Zoom-in does not work. Zoom-out works OK.
- The souce code developed for programming the Netlinx/touch panel or any other device on lab must be provided in source code form Requested by email
- Reboot of the media server results in "blue" screen every time
- this might be related to the DVD drivers (Christos Aposkitis will take care care of it) nsc
- MXM s/w Christos Aposkitis will bring the CD with the new version on Semptember
- Switcher, audio Mixer and other systems labeling
The microphone of position #5 is pointing to preset position #13moved on the mic mixers to the correct position. Desk mic is on position 13 nsc We might run out of positions on the mic mixers if we buy the three messing student mics- The Front camera looses its presets when it goes standby or looses power.
- Date and time on the AMX panel are both wrong.
Things to remember about the room
- There are three (3) windows-based Machines in the room besides the one sitting on the teacher's desk
- There is a need for "MANUAL" approval of only the critical windows patches for those three machines
- We need to setup an update schedule for the machines
- There is pending installation of the third plasma display as well as wiring in the floor panel